FAQ of Thermal insulation device sensor

2015-04-11

Sensor is a mechanical sensor is to convert some perceived physical, chemical, biological and other information to facilitate the detection, information processing device and having individual functions or assemblies. Usually made up of two parts-sensitive element and a processing circuit. Former Executive sensing function, which sensitive information element output amplification, transmission and other processing. Thermal insulation on the sensor device can be divided into S-type tension sensor depending on the appearance and function, pull pressure sensors. Often appear in the sensor using such a problem, the customer will complain about the quality of the thermal insulation device sensors, in fact, is not the quality of the sensor problem but when you use a force sensor to ignore some problemsas following.
    Some of the following considerations hope we can learn:
   1. bought a new sensor device needs to be calibrated. With standard weights or ring dynamometer calibration accuracy to be controlled within the standard error range.
   2. Sensor metering process can not have a hard-wired vibration, which can cause measurement inaccurate.
   3. In a sensor device (sensor installed), can not be welded or soldered directly to a large current, it will directly burn sensors and instruments. In need of repair or welding required to remove the sensor directly, then the welding operation.
   4. Measurement of material over the sensor load.